COPY RIGHTS : TO AVOID COPYRIGHT VIOLATIONS, ALL POSTS ARE SHOWN ALONG WITH SOURCES FROM WHERE ITS TAKEN. PLEASE CONTACT ME IN MY EMAIL SALEEMASRAF@GMAIL.COM , IF YOU ARE THE AUTHOR AND YOUR NAME IS NOT DISPLAYED IN THE ARTICLE.THE UNINTENTIONAL LAPSE ON MY PART WILL BE IMMEDIATELY CORRECTED.

I HAVE SHARED ALL MY PRACTICAL WATER TREATMENT EXPERIENCES WITH SOLVED EXAMPLE HERE SO THAT ANYBODY CAN USE IT.

SEARCH THIS BLOG BELOW FOR ENVO ,COMPACT STP,ETP,STP,FMR,MBBR,SAFF,IRON,ARSENIC,FLUORIDE,FILTER,RO,UASB,BIO GAS,AERATION TANK,SETTLING TANK,DOSING,AMC.

SEARCH THIS BLOG

Wednesday, August 25, 2004

SIMPLE WATER TREATMENT METHOD

THE AGE OLD METHOD OF WELL/POND WATER TREATMENT IS STILL THE MOST COMMONLY USED METHOD OF TREATING WATER FOR INDIVIDUAL HOMES .
 
IT REMOVES TURBIDITY OF WATER , IRON AND MANGANESE FROM WATER, DISINFECTS WATER .
 
The Steps Of Treatment Are As Follows:
1) Add lime to make the pH value of water 8 to 9 .
2) Add Aluminium Sulphate commonly known as Alum @ 5 mg per liter of water to be treated.
3)Add Potassium permanganate @ 1 mg per liter of water to be treated. After the addition of permanganate , the colour of water should become light pink .
4) The contact period of chemical reaction is 6 hours. That means water is to be held in the tank for six hours . After the detention period of six hours, the top water(Supernatent) can be used for daily use. The sludge settled at the bottom of the tank should be regularly removed.
 
 
 
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)